The reference designs mentioned below:

• Reduce development time by 98 percent
• Deliver higher quality, wider fi eldof-view HD images
• Decrease electronic bill of materials
• Empower customers to bring U.S. $150 HD IP cameras to the market These solutions reduce development to under four months by including Complete and optimized schematics and Gerber files
• Free Linux application source code, including:
– Integrated auto white balance and auto exposure
– Simple motion detection
– Dual-stream HD MPEG-4 and MJPEG video codecs to support recording and monitoring needs at full frame rates
– DaVinci IP camera software framework including I/O application programming interfaces (APIs), media APIs and DaVinci Codec Engine

DM365 IP Camera Reference Design: DM365IPNC-MT5

TI and Aptina Imaging (a division of Micron) have come together again to bring to market a single platform, H.264 reference design for faster development at a reduced cost.

Hardware features

• TI TMS320DM365 digital media processor based on DaVinci technology includes ARM926 and H.264 HW video coprocessor, EMAC, RTC and integrated voice codec for BOM savings
• Aptina 5-MP sensor CMOS imager optimized for low-light performance
• Board size 65×50 mm, low-power (3W) • Power over Ethernet, audio, SD storage

Software features

• Complete Linux-based IP net camera application including free source code
• Encode up to H.264/MPEG-4 HD 1080p at reduced frame rate or 720p full frame rate
• Triple stream per channel (H.264, MPEG-4, MJPEG)
• Integrated auto white balance and auto exposure
• Royalty-free, production-ready codecs included
• Software framework includes input/ output and media APIs, codec engine
• Ability to add video analytics with DaVinci TMS320DM643x DSP
• PSIA standard support

Video Content Analysis (VCA) DM355 IP Camera
Reference Design: DM355IPNC-VCA1

TI and Object Video have brought to market the VCA version of the DM355-based IP camera which supports Object Video intelligent video analytics. The analytics software provides simple monitoring and notifi cation of security events through a web browser. This reference design builds on the base solution (DM355IPNC-MT5) with a VCA daughter board.

Hardware features

• DaVinci™ TMS320DM6435 digital media processor
• DaVinci TMS320DM355 SoC, ARM926 and hardware video coprocessor
• Aptina 5 MP sensor (2×2 binning ~1.3 MP)
• VCA daughter board size 41×40 mm

Software features

• Complete Linux-based IP network camera application including free source code
• Dual-stream capabilities – MPEG-4 HD 720P + MPEG-4 CIF + G.711
• Triple-stream capabilities – MPEG-4 HD 720P + MJPEG VGA + MJPEG CIF + G.711
• Integrated auto white balance and auto exposure
• Field-proven, robust, royalty-free bundled MPEG-4 and MJPEG video codecs
• DaVinci IP camera software framework including I/O APIs, media APIs and DaVinci Codec Engine

TMS320DM355 IP Camera Reference Design: DM355IPNC-MT5

TI and Aptina Imaging (a division of Micron) have brought to market the original DM355-based IP camera highly optimized reference design.

Hardware features

• TMS320DM355 SoC, ARM926 and hardware video coprocessor
• Aptina 5 MP sensor (2×2 binning ~1.3 MP) CMOS imager optimized for low-light performance
• Board size 65×50 mm
• Low power (< 3 W)

Software features

• Complete Linux-based IP camera application including free source code
• Dual-stream capabilities – MPEG-4 HD 720p + MPEG-4 CIF + G.711 – MPEG-4 HD 720p + MJPEG CIF + G.711
• Integrated auto white balance and auto exposure
• Field-proven, robust, royalty-free bundled MPEG-4 and MJPEG video codecs
• DaVinci IP camera software framework including I/O APIs, media APIs and DaVinci Codec Engine
• Ability to add video analytics with DaVinci TMS320DM643x digital media processors

HD Video Surveillance IP Camera Reference Designs