MAX4940, MAX4940A are ideal for High-Voltage Applications Such As Portable Ultrasound Imaging and Industrial Flaw Detection . They find their applications in design of Cleaning Equipment, Flaw Detection, Piezoelectric Drivers, Test Instruments, Ultrasound Medical Imaging etc. The MAX4940/MAX4940A are designed to operate with high voltages.

The MAX4940/MAX4940A integrated circuits generate high-voltage, high-frequency, unipolar or bipolar pulses from low-voltage logic inputs. These quad/dual pulsers feature independent logic inputs, independent high-voltage pulser outputs with active clamps and independent high-voltage supply inputs.

The MAX4940/MAX4940A feature quad, high-voltage pulsers with 8.5Ω output impedance for the high-voltage outputs and a 21Ω impedance for the active clamp. The high-voltage outputs can provide 2.0A (typ) output current. All devices use two logic inputs per channel to control the positive and negative pulses. The MAX4940/MAX4940A have a dedicated input to control the active clamp. All devices feature an independent enable input EN. All digital inputs are CMOS compatible (see the Ordering Information/Selector Guide in the full data sheet).

The MAX4940/MAX4940A are available in a 56-pin, 8mm x 8mm, TQFN exposed pad package and are specified over the 0°C to +70°C commercial temperature range.

Key Features
•    High-Density Quad-Channel Pulser in One Package
•    0 to +220V Unipolar or ±110V Bipolar Outputs
•    8.5Ω (typ) Output Impedance and 2.0A (typ) Output Current
•    27Ω (typ) Always-On Active Clamp with Integrated Blocking Diodes
•    Integrated Output Diodes (MAX4940A Only)
•    No Special Power-Supply Sequencing Required for Trilevel Applications
•    Matched Rise/Fall Times and Matched Propagation Delays
•    CMOS-Compatible Logic Inputs
•    56-Pin, 8mm x 8mm, TQFN Package

Portable Ultrasound Imaging and Industrial Flaw Detection using MAX4940, MAX4940A