INSTRUCTIONS

INSTALLATION

Install the command organ of IPERkey in a place protected from antimanomissione 24hif possible in the antitheft central. Install the key hole in the pressed of the access way to the protected zones finding the right way between security and facility of operativity from the final customer. The installation of the key hole is advised however inside of the protected area.

Download the complete instructions in PDF -->iperkey_instr.pdf

PERFORMANCES

1. 4 RELAIS 1A 1FORM C

2. PASSO-PASSO IMPULSIVE PROGRAMMABLE FOR EVERY RELAIS
3. INSERTERS WITH 4 LED
4. INSERTERS COMPOUNDING LIVING/MAGIC
5. OUTPUT FALSE KEY
6. BLOCK SYSTEM IN CASE OF FALSE KEY
7. ANTITHEFT OUTPUT (COERCION)
8. AUTOGENERATED CODE
9. MASTER KEY FOR CODE CHANGE AND RIPROGRAMMing THE KEYS DIRECTLY FROM THE REMOTE KEY HOLE
10. DESIGN OF KEY
11. CONTACTS SELF-CLEANING AND PROTECT
12. PUSH-BUTTON ON MOTHER BOARD FOR CODE GENERATION
13. LED FOR SIGNALLING GENERATED CODE OR PROGRAMMED KEY OR PROBLEM
14. MIROCOMPUTER RISC FOR THE MANAGEMENT OF SYSTEM
15. EEPROM MEMORY FOR THE STATUS OF SYSTEM
16. PREDISPOSITION TO THE OPERATION IN POSITIVE SECURITY
17. EASY CONNECTION WITH WHATHEVER TYPE OF CENTRAL
18. RECOGNITION OF THE KEY THROUGH GENERAL CODE, PROGRESSIVE CODE AND CODE SYSTEM
19. SERIALE OUTPUT RS-232 FOR CONNECTION WITH A PRINTER (OPTIONAL)
20. POSSIBILITY OF OPERATION AS ACESS CONTROL
21. CONTACTS OF THE KEY HOLE PROTECTED AGAINST SHORT CIRCUITS
22. EMI FILTER AND PASSIVE PROTECTION ON INPUTS
23. DIP-SWITCH OF PROGRAMMING
24. NOT READY TO PROGRAMMABILE INSERTION
25. POSSIBILITY OF BREAKING APART THE SYSTEM DIRECTLY FROM THE KEY HOLE