3.1 Thru Hole board
The board is targeted to the development of small, homemade, custom circuits that can be transparently interfaced with the FLEX Base Boards. The board makes several common pin holes available to the user, for connecting electronic components.
Patterns marked with “piggybacking” are pins which come from the piggy backed FLEX board. Each pin on the piggy backing rows is connected to a pin on the most wide board section. The remaining board surface is divided into the most common pin hole patterns, such as:
1. standard 2.54 mm pattern;
2. standard 2.54 mm pattern with alternate phases, useful for, i.e., RJ45 and RS232 connectors, etc.;
3. standard 1.27 mm pattern, useful for connecting typical SMD components;
4. standard 5.08 mm pattern, useful for, i.e., clamps;
