The i.MX51 processor features Freescale's first advanced and power-efficient implementation of the ARM Cortex-A8 core.

Last week we saw how we can create a TSS (Touch Sensing Software) project. Now, let's see how to configure the TSS.

Freescale, the industry’s top provider of processors for eBooks, has joined forces with E Ikn, the leading supplier of eBook electronic paper displays to develop highly integrated embedded solutions that lower costs and foster innovation for eBook manufacturers and their customers.

The TSS - Touch Sensing Software solution transforms a standard micrcontroller into a proximity capacitive touch sensor controller. The touch sensor controller has the ability to control multiple touch pad configurations and mechanical keys while maintaining its standard MCU control functionality.

Freescale has developed a scalable portfolio of low-power microcontroller solutions blending leadingedge battery saving technology with a range of performance and peripheral options.

Freescale Semiconductor introduced a 50V laterally diffused MOS (LDMOS) RF power transistor designed to streamline UHF transmitter equipment designs.

PCI Express is a very popular interface standard with the transfer rate ranging from 500MBit/s to 8GBit/s (PCIe 2.0) in each direction, providing a high-speed bus for many devices such as graphics cards, sound cards, NICs.

LTE targets higher throughput, lower latency and efficient IP backhaul compared to previous 3GPP generations, to offer a new mass deployable mobile network technology which should herald a new age of rich multimedia and real-time services.

So the first thing you need to do is make up a circuit. How do you do that? I made up this one myself but you can find circuits online at various sites like discovercircuits.com or many others.

Freescale announced a smart metering solution based on the new MCF51EM Family of ColdFire V1 MCUs. The MCF51EM256/128 devices integrate on-chip 16-bit ADC, a flexible LCD controller etc

This article introduces the DirectDrive Technology in headphone amplifies, and overviews the MAX9724 DirectDrive Headphone Amplifier

The Digilent Cerebot 32MX4 Robotics Development Kit addresses the growing interest in robotics applications in the academic and hobbyist markets.

This article contains implementation instructions for the DDR2/mDDR interface contained on the TMS320DM35x Digital Media System-on-Chip (DMSoC) device. The approach to specifying interface timing for the DDR2/mDDR interface is quite different than on previous devices.

The UNI/O serial EEPROM is a single I/O EEPROM device that has been developed by Microchip. The EEPROM has been developed to work on the UNI/O Bus, a propriety single I/O bus protocol, also developed by Microchip.

Implementing a modular high-brightness LED matrix. The software was divided into simple modules that implement certain functionalities or features.

The ultrasonic distance-measurement peripherals in the MAXQ7667 include a burst signal generator for acoustic transmission and mixed signal circuits for amplifying and digitizing echo signals ranging between 25kHz and 100kHz.

The PIC16F610/616/16HV610/616 is covered by this data sheet. It is available in 14-pin PDIP, SOIC, TSSOP and 16-pin QFN packages.

The DS9097U is a sophisticated RS232 to 1-Wire adapter, which performs RS232 level conversion and actively generates the 1-Wire communication signals.

The MCP73113, MCP73114 and MCP73213 Lithium-Ion (Li-Ion); and MCP73123, MCP73223 Lithium Iron Phosphate (LiFePO4) Chargers feature high-accuracy voltage regulation and an integrated pass transistor.

The MAX17100 includes a high-voltage step-up regulator, three high-performance operational amplifiers, two linear regulators, two high-voltage switch control blocks for gate-driver supply modulation, a digital VCOM calibrator, and six independent scan drivers.

In this article, we'll analyze the source of this offset, and then we'll propose a solution based on integrated resistor networks.

This article discusses rail-to-rail op amps, and explains why some inputs and outputs can be less than, nearly, or slightly more than the power rails.

The MAX6010 is a low-noise, low-dropout, precision, micropower voltage reference in SOT23. This 3-terminal voltage reference operates with an input voltage from 3.2V to 5.5V, and outputs 3V.

The DS9092L iButton Probe with LED furnishes the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons.

Microchip introduced 2 new development tools to its simple and easy-to-use graphics display portfolio for 16- and 32-bit PIC microcontrollers and dsPIC digital signal controllers.