Implementing a modular high-brightness LED matrix. The software was divided into simple modules that implement certain functionalities or features.

The DS9092L iButton Probe with LED furnishes the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons.

This article describes a simple application in which a digital signal controller (DSC) is used to drive a high-brightness RGB LED for a pixel board, several of which are connected on a network to create an RGB matrix.

This article intends to provide you with an overview of the high-brightness LED driver ICs. You will learn about basic three types of LED driving methods, and selection of different products in terms of applications.

The intent of this article is to provide an overview of the LT3598 LED driver (datasheet) and discuss its key features and applications.

A high brightness LED evaluation board has been developed using the Fairchild Semiconductor FAN7554D PWM controller.

This article will overview LZ1-1xxx0x series of 3Watt and 5Watt LEDs from LedEngin Inc, also highlight key features and typical applications.

The FAN5617 Evaluation Board is a compact circuit including the FAN5617 in a 3x3mm 16-pin MLP package. LED brightness is controlled via a simple one-wire digital interface.

This article will introduce the basics behind color science, the industry terminology used when describing colors, the basic operation of LEDs, and how HB LEDs are used.

The FAN5645 evaluation board, a set of two completely assembled and tested surface mount boards, provides easy probe access points to all inputs and outputs so that the electrical characteristics and waveforms can be easily measured.