The DS1842A is a APD Bias Output Stage and Fast Current Monitor on a Single Chip. It integrates the discrete high-voltage components necessary for avalanche photodiode (APD) bias and monitor applications.

The MAX2209 comes in a space-saving 2 x 2, 0.5mm pitch wafer-level package (WLP) and requires only two external components.

The MAX2657/MAX2658 high-gain, low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim's advanced SiGe process, the devices achieve a high gain and an ultra-low-noise figure...

The DS1843 is a sample-and-hold circuit RSSI Burst-Mode Sample-and-Hold Circuit in a 2mm x 2mm µDFN Package and is useful for capturing fast signals where board space is constrained.

The MAX8834Y/MAX8834Z which are as described above a flash driver which can integrate a 1.5A PWM DC-DC step-up converter and three programmable low-side, low-dropout LED current regulators.

The OPA2333 series of CMOS operational amplifiers which boasts of a proprietary auto-calibration technique simultaneously provides very low offset voltage and near-zero drift over time and temperature.

The TAS5615 is a high-performance Class D amplifier which accepts analog input. It has integrated closed loop feedback technology (known as PurePath HD).

The BUF08832 which is a programmable Gamma-voltage generator offers eight programmable gamma channels and one programmable VCOM channel.

The Microchip Technology Inc. 24AA024/24LC024/ 24AA025/24LC025 is a 2 Kb Serial Electrically Erasable PROM(EEPROM) with a voltage range of 1.7V to 5.5V.

The MAX2839AS is a 2.3 to 2.7GHz MIMO wireless broadband, direct conversion, zero-IF, RF transceiver and is designed particularly for 802.16e MIMO mobile WiMAX™ systems.