The OPA2333 series of CMOS operational amplifiers which boasts of a proprietary auto-calibration technique simultaneously provides very low offset voltage and near-zero drift over time and temperature.

The MCP1703 is a family of CMOS low dropout (LDO) voltage regulators that can deliver up to 250 mA of current while consuming only 2.0 µA of quiescent current (typical).

The MCP606/7/8/9 family of operational amplifiers (op amps)are unity-gain stable with low offset voltage (250 µV, maximum).

The Microchip MCP6561/1R/1U/2/4 families of CMOS/TTL compatible comparators are offered in single, dual, and quad configurations.

An Integrated Circuit is a small Silicon (Si) wafer over which electronic circuits are manufactured. It is mainly composed of transistors, capacitors and resistors.

Maxim’s DG201A and DG211 consume significantly lower power making them better suited for portable applications. Maxim has also eliminated the need for the third (VL) power supply that is required for the operation of the original manufacturer’s DG211.

The M348X is a melody generator that is mask ROM programmed for multi instrument use. Developed by CMOS technology, it is a generator that can create melodies according to pre-programmed data.

The MAXQ2010 is a low-cost, high-performance, CMOS, fully static, 16-bit RISC microcontroller with flash memory and an integrated LCD controller. The MAXQ2010 supports up to a 160-segment LCD and supports 8 channels of high-performance measurement using a 12-bit successive approximation register (SAR) ADC with internal reference.

The DG408/DG409 switches operate with ±5V to ±20V bipolar supplies or with a +5V to +40V single supply. Connect V- to GND when operating with a single supply. Both device types can also operate with unbalanced supplies, such as +24V and -5V.

The MAX1697 capacitive charge pumps invert the voltage applied to their input. For highest performance, use low equivalent series resistance (ESR) capacitors (e.g., ceramic).